Freelander Service Procedures
HARNESSES
REPAIRS
86-7-7
61. Disconnect heated oxygen sensor multiplug.
62. Automatic gearbox only: Disconnect
multiplugs from gear selector.
63. Disconnect multiplug from accelerometer.
64. Manual gearbox only: Disconnect multiplug
from gear lever hill descent switch.
65. Disconnect Lucar from handbrake switch.
66. Release 2 relays from bracket and remove
bracket.
67. Release 4 clips securing harness to air ducting.
68. Remove nut from rear heater ducting and
remove ducting.
69. Remove 4 nuts securing steering column to
bracket and lower column.
70. Remove face level vent ducting to access main
harness clips.
71. Disconnect multiplug from window lift ECU.
72. Remove nut securing earth header to RH 'A'
post and release header.
73. Release multiplugs and earth header from LH
lower 'A' post.