Range Rover Classic
ELECTRICAL
1
REPAIR
BATTERY
Service repair no - 86.15.01
Remove
WARNING: During battery removal always
disconnect battery negative lead first. If
positive lead is disconnected with
negative lead in place, accidental contact of
wrench to any grounded metal part could cause a
severe spark, possibly resulting in personal
injury. Upon installation of battery connect
positive lead first.
1. Disconnect battery negative lead. Then
disconnect the positive lead.
2. Release four nuts securing battery bracket.
3. Remove bracket.
4. Remove battery.
Refit
5. Reverse removal procedure.
NOTE: Coat battery clamps and terminals
with petroleum jelly before refitting.
A.C. GENERATOR - V8i ENGINE
Service repair no - 86.10.01
Remove
1. Disconnect battery negative lead.
2. Remove 2 nuts securing cooling fan cowl centre
section, remove centre section.
3. Move drive belt tensioner pulley away from drive
belt, release drive belt from A.C. generator
pulley.
4. Remove 2 nuts and bolts securing alternator to
mounting bracket.
5. Position A.C. generator to obtain access to rear
cover, remove cover.
6. Disconnect ignition feed Lucar from A.C.
generator.
7. Remove 2 nuts securing terminals to A.C.
generator, release terminals from studs; remove
alternator.
Refit
8. Reverse removal procedure. Tighten A.C.
generator securing nuts to
24 Nm.