Range Rover Classic
ELECTRICAL
25
REPAIR
INSTRUMENT ILLUMINATION ELECTRONIC
DIMMER / RHEOSTAT
Service repair no - 86.65.07
Electronic dimming control switch is located in
instrument panel finisher. Rotate control to vary
intensity of illumination.
Remove
1. Disconnect battery negative lead.
2. Remove instrument panel finisher.
See
Instrument Panel Finisher
3. Remove 2 screws securing rheostat, remove
rheostat.
Refit
4. Reverse removal procedure.
WINDOW LIFT/HEATED SEAT CUSHION
SWITCHES AND BULBS
Service repair no - 86.25.16 - Switches
Service repair no - 86.45.29 - Bulb
Switch replacement
Remove
1. Disconnect battery negative lead.
2. Carefully release rear of surround from centre
console.
3. Remove screws, pry window lift switch surround
from glove box.
4. Disconnect multi-plug(s) at rear of switch(es).
5. Apply pressure to rear of switch, push it through
surround.
Bulb replacement
6. Identify bulb to be replaced and remove
appropriate switch.
7. Rotate bulb holder 90˚ and withdraw it from
switch; discard bulb and holder.
Refit
8. Reverse removal procedure.