2.0 petrol and diesel models
- Make
- Rover
- Model
- 400 Body Repair Manual
- Year
- 1995–2000
- Section
- Repairs › 2.0 petrol and diesel models
Panel repairs2.0 petrol and diesel models · page 1 of 2
2.0 petrol and diesel models
A. Front Inner wing B. Spring Housing C. RH Mount
A. Dashboard Upper Side Member B. Front Pillar Inner Lower C. Spring Housing
- Mould the related parts.
- Level and finish the burrs left on the welding surfaces with a sander.
- Fill all drilled holes by MIG or gas welding.
Use a hammer and dolly to even out the welded areas of the lower dashboard, front side frame and dashboard upper side member.
Parts & tools for this job For 1995 Rover 400
- PARTGlow plugsSearch: Rover 400 1995 glow plugs
- TOOLGlow plug socketSearch: glow plug socket
- TOOLDiesel compression testerSearch: diesel compression tester
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.