1.4 and 1.6 models
- Make
- Rover
- Model
- 400 Body Repair Manual
- Year
- 1995–2000
- Section
- Repairs › 1.4 and 1.6 models
Panel repairs1.4 and 1.6 models · page 1 of 3
A. Rear Beam
- Perform the main welding.
- Make 20% to 30% more spot welds than there were holes drilled.
- Weld as much as possible with the jig still mounted.
- Weld the front side frame, inner wing, spring housing and bulkhead.
WARNING: To prevent eye injury and burns when welding, wear an approved welding helmet, gloves and safety shoes.
1.4 and 1.6 models
2.0 petrol and diesel models
Parts & tools for this job For 1995 Rover 400
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Rover 400
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.