Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Restraint systems05 Body06 Panel repairs
Rover 400 Body Repair Manual (1995-2000)06 · Panel repairs
06 · General

1.4 and 1.6 models (page 3 of 3)

Make
Rover
Model
400 Body Repair Manual
Year
1995–2000
Section
Repairs
Panel repairs1.4 and 1.6 models · page 3 of 3
  1. Apply the paint.

WARNING: Ventilate when spraying paint. Most paint contains substances that are harmful if inhaled or swallowed. • Read the paint label before opening paint container. • Avoid contact with the skin. Wear an approved respirator, gloves, eye protection and appropriate clothing when painting. • Paint is flammable. Store it in a safe place, and keep it away from sparks, flames or cigarettes.

  1. Apply the undercoat. Undercoat the front door, and apply anti-rust agent to the inside of the welding section of the side sill, front side frame, etc.
  2. Install the related parts. Install in the reverse order of removal.
  3. Inspect, check and adjust.
  • Measure the front wheel alignment.
  • Inspect the brake system.
  • Adjust the headlight aim.

Parts & tools for this job For 1995 Rover 400

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.