Freelander Service Procedures
HEATING AND VENTILATION
REPAIRS
80-21
Fuel pump - fuel burning heater - from
03MY
$% 80.40.40
Remove
1. Disconnect battery earth lead.
WARNING: Fuel vapour is highly flammable
and in confined spaces is also explosive
and toxic. Always have a fire extinguisher
containing foam, CO
2
, gas or powder close
at hand when handling or draining fuel.
2. Raise vehicle on lift.
3. Remove 2 bolts securing fuel pump and filter
assembly to body.
4. Lower fuel pump and filter assembly.
5. Disconnect multiplug from fuel burning heater
pump.
6. Position container below fuel pipes to collect
fuel spillage.
7. Disconnect fuel pipes from fuel burning heater
pump.
CAUTION: Before disconnecting or
removing components, ensure the
immediate area around joint faces and
connections are clean. Plug open
connections to prevent contamination.
8. Release and remove fuel burning heater pump
from fuel pump and filter assembly.
Refit
1. Clean fuel pipe connections.
2. Fit and secure fuel burning heater pump to fuel
pump and filter assembly.
3. Connect fuel pipes to fuel burning heater pump.
4. Remove container from below fuel pipes.
5. Connect multiplug to fuel burning heater pump.
6. Position fuel pump and filter assembly to body,
fit bolts and tighten to 10 Nm (7 lbf.ft).
7. Lower vehicle on lift.
8. Connect battery earth lead.
M19 3624