Freelander Service Procedures
HEATING AND VENTILATION
REPAIRS
80-15
Resistor unit - fan motor
$% 80.20.17
Remove
1. LHD models only: Disconnect air inlet
connector hose from heater and evaporator.
2. Disconnect multiplug from resistor.
3. Release clip and remove resistor from heater.
Refit
1. Fit resistor to heater.
2. Connect multiplug to resistor.
3. LHD models only: Connect air inlet connector
hose.
Matrix - heater
$% 80.20.29
Remove
1. Remove heater assembly.
2. Remove screw securing pipe clamp to heater
casing and remove clamp.
3. Remove 2 screws from matrix cover and
remove cover.
4. Remove heater matrix.
Refit
1. Fit heater matrix to heater assembly.
2. Fit matrix cover and secure with screws.
3. Fit pipe clamp and secure with screw.
4. Fit heater assembly.