Range Rover Classic Front Door Trim Panel Repair
76
CHASSIS AND BODY
24
REPAIR
FRONT DOOR TRIM PANEL
Service repair no - 76.34.01
Remove
1. Disconnect battery negative lead.
2. Remove screw securing handle surround.
3. Remove surround.
4. Pry sill button surround from trim panel.
5. Remove buttons from bottom of door pull pocket.
6. Remove screws, withdraw pocket from trim
panel.
7. Use trim stud release fork, start at front bottom
corner and release 14 trim studs from door
panel.
NOTE: Support trim panel while speaker
leads are disconnected.
8. Disconnect 2 multiplugs from speakers.
Do not
carry out further dismantling if component is
removed for access only.
9. Remove 2 nuts securing speaker grille, depress
3 clips and remove speaker.
10. Remove 4 plates retaining speaker harness and
release harness connector block.
11. Depress 2 clips retaining tweeter speaker,
disconnect 2 Lucars and remove tweeter.
12. Disconnect 2 Lucars from top speaker and
multiplug from bottom speaker.
13. Remove 4 nuts securing each speaker and
remove 2 speakers from panel.
14. Remove trim panel pocket secured by 6 screws.
15. Remove 14 trim clips from trim panel.
16. Transfer components removed to new trim
panel.
NOTE: Renew trim clips as necessary.
Refit
17. Reverse removal procedure.