REAR DOOR GLASS AND REGULATOR
- Make
- Land Rover
- Model
- Range Rover Classic
- Section
- REPAIR › REAR DOOR GLASS AND REGULATOR
CHASSIS AND BODY
31
REPAIR
REAR DOOR LOCK AND HANDLE ASSEMBLY
Service repair no - 76.37.48
Outside door release handle to lock
1. Disconnect connecting rod at rear of door outer
release handle.
2. Rotate rod to adjust operating length as
required, so that door release occurs before
maximum handle movement.
REAR DOOR GLASS AND REGULATOR
Service repair no - 76.31.02 / 76.31.46
Remove
1. Fully close window and secure with tape.
2. Disconnect battery negative lead.
3. Remove trim panel.
See Rear Door - Trim
Panel
4. Remove sill button.
5. Remove plastic vapour barrier.
6. Remove window lift motor.
See ELECTRICAL,
Repair, Window Lift Motor - Rear Doors
7. Remove four window regulator screws with
shakeproof washers.
8. Disengage lifting arm stud from channel and
remove window regulator.
Parts & tools for this job For Land Rover Range Rover
- TOOLTrim removal tool kitSearch: trim removal tool kit
- PARTTouch-up paintSearch: Land Rover touch up paint
- PARTPanel clip assortmentSearch: Land Rover panel clips assortment
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.