landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

76 - CHASSIS AND BODY|BONNET > < INNER BODY SHELL ASSEMBLY|Page 893
Page 587
background image

CHASSIS AND BODY

11

REPAIR

HEADLINING

Service repair no - 76.64.01

Remove

1. Remove spare wheel.
2. Remove rear seat belt upper guide brackets and

inertia reel assemblies.

3. Fold rear seat backrest forward. Recline front

seats.

4. Disconnect battery negative lead.
5. Remove two roof lamp assemblies. Remove

interior lamp mounting panel if sunroof is fitted.

6. Remove rear view mirror.
7. Remove two sun visors and centre retaining

bracket.

8. Remove passenger grab handles.

Sunroof vehicles: Remove edge trim and clips
from roof opening.

9. With assistance support front of headlining.

Remove two plastic retaining clips above rear
door.

10. Remove two plastic retaining clips securing rear

end of headlining near upper tailgate hinges.

11. Pull headlining forward to clear rear quarter trim.

Lower headlining,disconnect electrical leads
from speakers.

12. Remove headlining through tailgate.

CAUTION: To assist removal tilt headlining
at an angle. DO NOT flex headlining as
damage may occur.

Refit

13. Reverse removal procedure.

Sunroof vehicles: Secure headlining around
roof opening with edging finisher.

ROOF PANEL

Service repair no - 76.10.13

Remove

1. Remove headlining.

See Headlining

2. Remove blanking plugs from rail above door

frames to access screws.

3. Remove the screws washers from around inner

edge of roof panel.

4. With assistance lift roof panel from body.

Remove sealant from roof and body mating
faces.

Refit

5. Apply sealant to roof and body mating faces.
6. Reverse removal procedure.

76 - CHASSIS AND BODY|BONNET > < INNER BODY SHELL ASSEMBLY|Page 893