Range Rover Classic
CHASSIS AND BODY
13
REPAIR
5. Remove four bolts,spring and plain washers
retaining decker[cowl] panel to wing[fender]s.
6. With assistance place a tube over each hinge
and lower to enable decker[cowl] panel to be
removed. Slowly return hinges to upright
position.
WARNING: Gradually let hinges return to
upright position to prevent possibility of
personal injury or damage.
Refit
7. Reverse removal procedure.
8. Using a soft blunt implement ease windscreen
rubber onto top of decker[cowl] panel.
FRONT WING
Service repair no - 76.10.24
Remove
1. Remove wheel arch liner.
See Front Wheel
Arch Liner
2. Remove side light and flash lamp assembly.
See ELECTRICAL, Repair, Side Light and
Flash Lamp Assembly and bulb
3. Remove screws, plain washers from bottom of
side light recess.
4. Remove fixings securing bumper end cap.
Remove moulding from bumper.
5. Remove bolt which secures spoiler to front
wheel arch.
6. Release decker[cowl] panel.
See Decker Panel
7. Remove five nuts, bolts, plain and spring
washers securing wing[fender] to valance.
8. Remove two bolts, plain washers, securing sill
finisher to bottom of wing[fender].