Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K806 Engine - K1607 Engine - K16 with VVC08 Engine - L Series09 Emission control10 Engine management system - MEMS11 Engine management system - EDC12 Fuel delivery system13 Cooling system - K Series14 Cooling system - L Series15 Manifold & exhaust systems16 Clutch17 Manual gearbox - R6518 Manual gearbox - PG119 Automatic gearbox - CVT20 Automatic gearbox21 Drive shafts22 Steering23 Front suspension24 Rear suspension25 Brakes26 Restraint systems27 Body28 Heating & ventilation29 Air conditioning30 Wipers & washers31 Electrical32 Instruments
Rover 200 Workshop Manual (1995-1999)08 · Engine - L Series
08 · Engine

Models with intercooler

Make
Rover
Model
200 Workshop Manual
Year
1995–1999
Section
Repairs › Models with intercooler
Engine - L SeriesModels with intercooler · page 1 of 3

Models with intercooler

Models with intercooler
  1. Disconnect harness multiplug from throttle potentiometer

All models

All models – Disconnect harness multiplug from throttle potentiometer
  1. Release clip and disconnect brake servo vacuum hose from vacuum pipe.
All models – Release clip and disconnect brake servo vacuum hose from vacuum pipe.
  1. Disconnect multiplug from EGR solenoid.
  2. Disconnect vacuum pipe from EGR valve.
All models – Disconnect vacuum pipe from EGR valve.
  1. Loosen clip and disconnect hose from coolant rail.
All models – Loosen clip and disconnect hose from coolant rail.
  1. Loosen clip and disconnect hose from heater valve.
  2. Position container to collect fluid loss from power steering system.

Parts & tools for this job For 1995 Rover 200

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.