Models without intercooler

67. Fit engine management relay module. See ENGINE MANAGEMENT SYSTEM - EDC, Repairs.
68. Fit ECM. See ENGINE MANAGEMENT SYSTEM - EDC, Repairs.
69. Fit air cleaner. See ENGINE MANAGEMENT SYSTEM - EDC, Repairs.
70. Replace receiver/dryer. See AIR CONDITIONING, Repairs.
71. If required: Refill engine with oil. See MAINTENANCE.
72. Lower vehicle.
73. Recharge air conditioning system. See AIR CONDITIONING, Adjustments.
74. Fit engine acoustic cover. See BODY, Exterior fittings.
75. Fill gearbox with correct grade of oil. See MANUAL GEARBOX - ’PG1’, Adjustments.
76. Refill cooling system. See COOLING SYSTEM - ’L’ SERIES, Adjustments.
77. Bleed power steering system. See STEERING, Adjustments.

Models without intercooler

78. Adjust throttle cable. See ENGINE MANAGEMENT SYSTEM - EDC, Adjustments.

ENGINE AND GEARBOX - MODELS WITHOUT AIR CONDITIONING

Service repair no - 12.37.01.99

Remove

1. Raise vehicle on a 2 post ramp.
2. Drain gearbox oil. See MANUAL GEARBOX - ’PG1’, Adjustments.
3. Drain cooling system. See COOLING SYSTEM - ’L’ SERIES, Adjustments.
4. Disconnect battery earth lead.
5. Remove engine acoustic cover. See BODY, Exterior fittings.
6. If required, drain engine oil. See MAINTENANCE.
7. Fit new sealing washer to drain plug, fit drain plug and tighten to 25 Nm.
8. Remove air cleaner. See ENGINE MANAGEMENT SYSTEM - EDC, Repairs.
9. Remove ECM. See ENGINE MANAGEMENT SYSTEM - EDC, Repairs.
10. Remove engine management relay module. See ENGINE MANAGEMENT SYSTEM - EDC, Repairs.