Replacement (page 2 of 4)
- Make
- Rover
- Model
- 400 Body Repair Manual
- Year
- 1995–2000
- Section
- Repairs
Panel repairsReplacement · page 2 of 4
A. Outer panel B. Centre Pillar Stiffener C. Inner pillar D. Inside sill E. Outer panel
- Mould the related parts.
- Fill any holed areas by MIG or gas welding.
WARNING: To prevent eye injury and burns when welding, wear an approved welding helmet, gloves and safety shoes.
- Level and finish burrs at welded areas with a disc sander, then even them out with a hammer and dolly.
- Sand off the undercoat from both sides of the flange to be welded.
Parts & tools for this job For 1995 Rover 400
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
- TOOLSocket setSearch: socket set metric
- BOOKHaynes manualSearch: Haynes manual Rover 400
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.