Inspection
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Repairs › Inspection
Automatic gearboxInspection
Inspection
- Clean all parts thoroughly in solvent or cleaner, dry with compressed air. Blow out all passages.
- Replace servo valve body as an assembly if parts are worn or damaged.
- Replace strainer if inlet is clogged.
- Coat all parts with transmission fluid before assembly and fit new 'O' rings.
| No. | Valve spring | Standard (New) | |||
|---|---|---|---|---|---|
| Wire diameter | Outside diameter | Free length – new | No. of coils | ||
| AA | 4th accumulator spring | 2.90 | 22 | 90.1 | 10.9 |
| BB | 1st hold accumulator spring | 4 | 25 | 64.7 | 7.3 |
| CC | 3rd accumulator spring | 2.6 | 17.5 | 104.5 | 18 |
Parts & tools for this job For Rover 600
- PARTTransmission filter kitSearch: Rover 600 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Rover automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.