Inspection
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Repairs › Inspection
Automatic gearboxInspection
Inspection
- Clean all parts thoroughly in solvent or carburetter cleaner, and dry with compressed air. Blow out all passages.
- Coat all parts with transmission fluid before assembly and fit new 'O' rings.
CAUTION: Do not use a magnet to remove the check balls; it may magnetize the balls.
| No. | Accumulator spring | Standard (New) | |||
|---|---|---|---|---|---|
| Wire diameter | Outside diameter | Free length – new | No. of coils | ||
| AA | 1st accumulator | 1.8 | 16.3 | 115.4 | 18.6 |
| BB | 2nd accumulator | 3.3 | 22 | 84.9 | 11.1 |
Parts & tools for this job For Rover 600
- PARTTransmission filter kitSearch: Rover 600 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Rover automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.