Freelander Service Procedures
EXTERIOR FITTINGS
REPAIRS
76-2-3
Liner - rear wheel arch
$% 76.10.49
Remove
1. Raise rear of vehicle.
WARNING: Do not work on or under a
vehicle supported only by a jack. Always
support the vehicle on safety stands.
2. Remove road wheel(s).
3. Remove rear mud flap.
4. Remove screw securing mud flap bracket to
bumper and remove bracket.
5. Remove 2 scrivets securing wheel arch liner to
wing.
6. Remove 3 screws securing wheel arch liner to
wing and bumper.
7. Remove 5 retaining studs securing wheel arch
liner to inner wing.
8. Release and remove wheel arch liner.
Refit
1. Position wheel arch liner to inner wing.
2. Fit retaining studs securing wheel arch liner to
inner wing.
3. Fit and tighten screws securing wheel arch liner
to wing and bumper.
4. Fit scrivets securing wheel arch liner to wing.
5. Position mud flap bracket to bumper and
secure with screw.
6. Fit rear mud flap.
7. Fit road wheel(s) and tighten nuts to 115 Nm
(85 lbf.ft).
8. Remove stands and lower vehicle.
