Freelander Service Procedures
HEATING AND VENTILATION
REPAIRS
80-9
Refit
1. Position heater controls to replacement heater.
2. Connect air distribution cable to lever and
abutment.
3. Connect air blend cable to lever and abutment.
4. Connect multiplugs to heater controls.
5. Fit heater and secure with nuts and bolt.
6. Position harness and connect to clips on
heater.
7. Fit air inlet connector hose.
8. Fit RH demister vent duct to heater.
9. Models with passenger airbag, fit carrier.Fit
RH outer face level vent duct to heater and
secure to body with bolt.
10. Fit LH demister vent duct to heater.
11. Fit LH outer face level vent duct to heater and
secure to body with bolt.
12. Models with A/C: Connect multiplug to
evaporator.
13. Connect multiplug to heater and secure
diagnostic socket.
14. Connect multiplugs to heater controls.
15. Fit console support bracket and secure with
bolts.
16. Fit relays to console support bracket.
17. Fit fascia.
18. Connect heater hoses and secure with clips.
19. Refill cooling system.
ADJUSTMENTS, Coolant - drain and refill.
COOLING SYSTEM - K SERIES 1.8,
ADJUSTMENTS, Coolant - drain & refill.