Freelander Service Procedures
INTERIOR TRIM COMPONENTS
REPAIRS 76-3-11
Console assembly - front - from 04MY
$% 76.25.01
Remove
1. Remove rear console.
2. Remove gear selector indicator assembly.
REPAIRS, Selector indicator - from 04MY.
3. Carefully lever upper console finisher rearward,
to release clips on forward edge of finisher.
4. Remove 4 screws securing centre console.
5. Disconnect 6 multiplugs and remove console.
NOTE: Do not carry out further dismantling if
component is removed for access only.
6. Remove switches from console, noting fitted
position.
7. Remove 4 screws securing ash tray to centre
console finisher and remove ash tray.
Refit
1. Fit switches to console.
2. Fit and secure ash tray to centre console
finisher.
3. Position console assembly and connect
multiplugs.
4. Fit console and secure with screws.
5. Align upper console finisher and secure with
clips.
6. Refit gearshift selector assembly.
REPAIRS, Selector indicator - from 04MY.
7. Fit rear console.
M76 4695