Freelander Service Procedures
INTERIOR TRIM COMPONENTS
76-3-10 REPAIRS
14. Remove centre console.
15. Remove 4 screws from switch pack assembly
and remove assembly.
Refit
1. Position switch pack assembly, fit and tighten
screws.
2. Position console to fascia.
3. Connect multiplugs and bulb holder to switch
pack.
4. Automatic gearbox only: Connect multiplugs
to gear selector.
5. Fit centre console.
6. Fit and tighten screws securing centre and
sides to console.
7. Fit and tighten screws securing switch pack to
console.
8. Fit and tighten screws to top of console.
9. Position radio cage to console and secure with
retaining tags.
10. Position heater control panel, fit and tighten
screws.
11. Fit heater control knobs.
12. Manual gearbox only: Fit descent selector.
13. Fit gear lever knob.
14. Fit radio.
15. Fit rear console.
