Adjust (page 2 of 2)
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Repairs
Automatic gearboxAdjust · page 2 of 2
- Slacken the locknuts on the throttle control cable.
- Remove the free play in the throttle control cable with the locknuts while pushing the throttle control lever to the fully – closed position.
- Tighten the locknuts
- After tightening the locknuts, inspect the synchronization and throttle control lever movement.
- To alter the shift/lock – up characteristics to a particular customer’s requirements, you can adjust the throttle control cable up to 2 mm shorter than the "synchronized" point.
Parts & tools for this job For Rover 600
- PARTTransmission filter kitSearch: Rover 600 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Rover automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.