Components (page 2 of 2)
- Make
- Rover
- Model
- 600 Rover 600 Repair Manual - Volumes 1 and 2 - 2nd Edition
- Section
- Repairs
Automatic gearboxComponents · page 2 of 2
- Clean all parts thoroughly in solvent or cleaner, and dry with compressed air. Blow out all passages.
- Check all valves for free movement. If any fail to slide freely, see Valves and valve body.
- Coat all parts with transmission fluid before assembling.
- Replace the valve body as an assembly if any parts are worn or damaged.
- Tighten throttle cam stopper bolt to 8Nm.
| No. | Valve Spring | Standard (New) | |||
|---|---|---|---|---|---|
| Wire diameter | Outside diameter | Free length – new | No. of coils | ||
| AA | Throttle valve B | 1.4 | 8.5 | 41.5 | 10.5/11.2/12.4 |
| BB | Throttle valve B adjustment | 0.8 | 6.2 | 30.0 | 8 |
| CC | Relief valve | 1.0 | 8.4 | 39.1 | 15.1 |
Parts & tools for this job For Rover 600
- PARTTransmission filter kitSearch: Rover 600 transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Rover automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.