LR3/Disco 3 Workshop Service and Repair Manuals

Four-Wheel Alignment (57.65.04)  

 
NOTE:  

 
1.  Check the tie rod ends, suspension joints, wheel bearings and wheels and tires for damage, wear and free play.  

 
 
2.  Check and adjust tire pressures.  
 
 
3.  Position the vehicle on a calibrated, level, vehicle lift.  
 
 
4.  Release the vehicle parking brake.  
 
 
5.  Check the suspension ride height.  

Ride Height Adjustments (60.90.03)

Specifications

Specifications

 
 
6.  NOTE:  

 
Using only four wheel alignment equipment approved by Land Rover, check and adjust the wheel alignment.  

Specifications

 
 
7.  NOTE:  

   CAUTION: Make sure the vehicle is on a flat level surface.

   CAUTION: Make sure the tire pressures are within specification.

   CAUTION: Make sure that only the manufacturers' recommended four wheel alignment equipment is 

used.

   CAUTION: Make sure the vehicles fuel tank is full, if not distribute extra weight evenly over the fuel tank 

area to represent a full tank of fuel. 

   CAUTION: Make sure there are no heavy objects in the vehicle.

   CAUTION: Make sure the air suspension is set to NORMAL ride height.

   CAUTION: Make sure the steering is in the straight ahead position.

This procedure can be used on vehicles with either air or coil spring suspension. 

l

Adjust or repair any worn, damaged or incorrectly adjusted components. 

If rear camber adjustment is required, loosen the rear camber adjustment bolts enough to allow adjustment before 
starting any other wheel alignment adjustments. Do not fully loosen the rear camber adjustment bolts.