LR3/Disco 3
Blower Motor (80.20.15)
Removal
Installation
Published : Apr 30, 2004
1 .
Remove the glove compartment. For additional information, refer to
Glove Compartment (76.52.03)
(Section 501-12)
2 .
Remove the passenger side closing trim panel.
Release the clip.
Remove the 2 screws.
Disconnect the electrical connector.
3 .
Position the footwell duct aside for access.
Release the clip.
4 .
Remove the blower motor.
Disconnect the electrical connector.
Remove the 3 screws.
1 .
Install the blower motor.