Land Rover Workshop Service and Repair Manuals

Accelerator Pedal (19.20.01)  

Removal  

Published : May 24, 2004

1 . 

  Remove the driver side closing trim panel. 

Release the clip. 

Remove the 2 screws. 

Disconnect the electrical connector.

2 . 

  Remove the accelerator pedal assembly. 

Release the wiring harness. 

Remove the 3 nuts. 

Disconnect the electrical connector.

3 .    

NOTE :

  Do not disassemble further if the component is removed for access only. 

  Remove the accelerator pedal bracket. 

Remove the 3 nuts and bolts.