LR3/Disco 3
Glow Plug System
COMPONENT LOCATIONS
GENERAL
The glow plug system has a glow plug installed in the inlet side of each cylinder. The glow plugs heat the combustion
chambers before and during cranking, to aid cold starting, and after the engine starts to reduce emissions and engine
noise when idling with a cold engine.
A glow plug wiring harness on each bank of glow plugs is connected to a separate relay and fusible link in the Battery
Published : Apr 21, 2004
Item Part Number
Description
1
-
B (LH) bank glow plug relay
2
-
A (RH) bank glow plug relay
3
-
Glow plug indicator
4
-
Glow plug (x 6)
5
-
Glow plug harness (x 2)