LR3/Disco 3
Rear Crossmember
Removal
Installation
Published : Sep 29, 2004
1 .
Load vehicle onto ramp.
2 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00
Charging System - General Information)
3 .
Remove the rear bumper cover. For additional information, refer to
Rear Bumper Cover (76.22.74)
(Section 501-19 Bumpers)
4 .
Remove the spare wheel and tire.
5 .
Remove the rear bumper fixings.
6 .
Item
Description
1
Mig weld. (R/H is symmetrically opposite to L/H).
7 .
For additional information:
Welding. For additional information, refer to
Body Repairs
(Section 501-25A Body Repairs
- General Information)
Corrosion protection. For additional information, refer to
Corrosion Protection
(Section
501-25B Body Repairs - Corrosion Protection)
Tolerance checks. For additional information, refer to
Body and Frame
(Section 501-26
Body Repairs - Vehicle Specific Information and Tolerance Checks)
1 .
Install is the reversal of removal.