LR3/Disco 3
Glass, Frames and Mechanisms
FRONT SCREEN
The laminated front screen is bonded, and sealed, to the body aperture using PU sealant. Heat bonded to the inner
surface of the screen is the optical unit for the rain sensor and the interior mirror mounting boss.
Vertical fine-wire multi-strand elements are fitted between the glass laminations to de-ice and demist the screen. At the
bottom of the screen six horizontal heating elements bonded to the interior glass surface prevent the wiper blades
freezing to the screen during adverse weather conditions. For additional information, refer to
Control Components
(412-
04 Control Components)
.
The screen is supplied with the heating element flat foil connectors fitted to a moulded sealed terminal block. This
terminal block is wired to a connector for connecting to the vehicle harness.
REAR SCREEN
Rear Screen Components
Published : Apr 30, 2004
Item Part Number
Description
1.
-
Front screen
2.
-
Finisher
3
-
Heated front screen connectors
