LR3/Disco 3
Catalytic Converter LH (17.50.03)
Special Service Tools
Wrench, HO2S
310-121 (LRT-19-014)
Removal
Installation
Published : May 11, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the
vehicle on safety stands.
Raise and support the vehicle.
3 .
Remove the exhaust system. For additional information, refer to
Exhaust System (30.10.08)
(Section
309-00)
4 .
Remove the catalytic converter.
Remove the nut and release the retaining clamp.
5 .
NOTE :
Do not disassemble further if the component is removed for access only.
Using the special tool, remove both HO2S from the catalytic converter.
1 .