LR3/Disco 3
Back Panel (77.80.20)
Removal
NOTE :
Published : Sep 29, 2004
When replacing the back panel it is necessary to remove a section of the rear lamp panel.
1 .
Disconnect both battery cables. For additional information, refer to
Specifications
(Section 414-00
Charging System - General Information)
2 .
Remove the rear bumper cover. For additional information, refer to
Rear Bumper Cover (76.22.74)
(Section 501-19 Bumpers)
3 .
Remove both D-pillar trim panels. For additional information, refer to
D-Pillar Trim Panel (76.13.30)
(Section 501-05 Interior Trim and Ornamentation)
4 .
Remove the tailgate hinge trim cover.
5 .
Remove the tailgate weather seal.
6 .
Remove the load space trims.
7 .
Remove the load space carpets.
8 .
With assistance remove the tailgate.
9 .
Remove the L/H exhaust heatshield tailpipe.
10 .
Remove the R/H exhaust heatshield tailpipe.
11 .
Remove the spare wheel and tire.
12 .
Release the back panel wiring harness.
13 .
Item
Description
1
20 plug welds.
2
42 spot welds.
3
4 plug welds.
4
21 plug welds.
5
4 plug welds.