LR3/Disco 3
Clutch System Bleeding
1 .
Raise and support the vehicle.
2 . Remove the transmission undershield.
3 . Check that all the clutch line connections are tight and that there are no signs of leaks.
4 . Remove the brake master cylinder cover.
5 .
Fill the brake fluid reservoir.
Published : May 13, 2004
WARNING: Do not work on or under a vehicle supported only by a jack. Always support the vehicle on
safety stands.
Remove the 6 bolts.
Release the 3 clips.
WARNING: Do not allow dirt or foreign liquids to enter the reservoir. Use only new Shell DOT 4 ESL
brake fluid from airtight containers. Do not mix brands of brake fluid as they may not be compatible.
CAUTION: Brake fluid will damage paint finished surfaces. If spilled, immediately remove the fluid and
clean the area with water.
Remove the filler cap.