LR3/Disco 3
Audio Amplifier (86.50.36)
Removal
Installation
Published : Jun 14, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the RH front seat. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-
10)
3 .
CAUTION: Cover fibre optic cable connectors to minimise dust ingress and avoid bending the
cables in a radius of less than 30 mm.
Remove the amplifier.
Remove the 4 bolts.
Disconnect the 5 electrical connectors.
1 .
Install the amplifier.
Install the bolts and tighten to 10 Nm (7 lb.ft).
Connect and secure the electrical connectors.
2 .
Install the front seat. For additional information, refer to
Front Seat (78.10.44/99)
(Section 501-10)
3 .
Connect the battery ground cable. For additional information, refer to
Specifications
(Section 414-00)
