LR3/Disco 3
External Controls
Gear Change Mechanism
The gear change assembly is bolted to the transmission tunnel via a floater bracket. A pin and retainer connects the shift
rod to the transmissions selector shaft. A steady rod is fitted between the gear change mechanism and the rear of the
transmission casing. The rod is held in place by means of a clevis pin for added strength and rigidity.
Published : Apr 30, 2004
Item Part Number Description
1
-
Gear knob
2
-
Gear lever
3
-
Gaiter
4
-
Shift rod
5
-
Clevis pin
6
-
Roll pin
7
-
Steady rod
8
-
Floater bracket