LR3/Disco 3
Crankcase Vent Oil Separator (17.10.04)
Removal
Published : Aug 5, 2004
1 .
Disconnect the battery ground cable. For additional information, refer to
Specifications
(Section 414-
00)
2 .
Remove the intake air shutoff throttle. For additional information, refer to
Intake Air Shutoff Throttle
(19.70.32)
(Section 303-04)
3 .
Disconnect the low-pressure fuel lines.
Install blanking caps to the exposed ports.
4 .
Disconnect both exhaust gas recirculation (EGR) coolant cross-over pipe hoses.
Clamp the EGR coolant hoses to minimize coolant loss.
5 .
Remove the EGR coolant cross-over pipe.
Remove the two retaining bolts.
