LR3/Disco 3
A-Pillar Trim Panel (76.13.26)
Removal
Published : Jun 16, 2004
1 .
Release the door weatherstrip to access the A-pillar upper trim panel and instrument panel end
panel.
2 .
Remove the instrument panel end panel.
Release the clip.
3 .
Remove the A-pillar upper trim panel.
Release the screw cover.
Remove and discard the Torx screw.
Release the clip.
4 .
NOTE :
Do not disassemble further if the component is removed for access only.
Remove the screw retainer and clip from the A-pillar upper trim panel.