landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

303-01A Engine- 4.0L|Specifications|Page 749 > < Valve Stem Diameter
Page 1
background image

 
 

Specifications  

Sealers  
 

 
 
Lubricant - UK, Europe and ROW - Not NAS/Japan  
 

 
 
* WSS is a Ford prefix to the oil specification Lubricant - NAS/Japan  
 

 
 
* WSS is a Ford prefix to the oil specification Capacity  
 

 
 
General Specification  
 

Published : Oct 6, 2004

Item 

Land Rover Part No.

Engine timing cover to cylinder block 

STC 50550 

Rear main bearing cap to cylinder block  8510302 

Item 

Specification 

* Recommended 
lubricant 

The use of 5W/30 oil to Specification WSS - M2C929-A is preferred. Where oil to this specification 
is not available, then 5W/30 oil meeting specifications ACEA A1/A3 or API SJ or SL may be used. 

Item 

Specification 

* Recommended 
lubricant 

Use 5W/30 oil meeting Specification WSS-M2C929-A (GF4) and 'Certified for Gasoline Engines' 
by the American Petroleum Institute (API). 

Item 

Capacity 

Dry fill including filter 

6.4 litres (11.2 pints) (6.7 US 
quarts) 

Oil and filter change - Maximum 

5.7 litres (10.0 pints) (6.0 US 
quarts) 

Amount of oil required to bring the level from the lower to the upper holes on the 
dipstick 

1.4 litres (2.4 pints) (1.5 US 
quarts) 

Item 

Specification 

Type 

4.0 litre, 60 degree 'V', petrol engine, single overhead camshaft per cylinder head, 
2 valves per cylinder 

Cylinder arrangement 

V6, numbers 1 and 4 cylinders at front of engine when engine is viewed from rear 

Cylinder numbering 

Number 1 cylinder - right hand bank; Number 4 cylinder - left hand bank 

Bore - nominal 

100.4 mm (3.952 in) 

Stroke 

84.4 mm (3.322 in) 

Capacity 

4009 cm³ (244.5 in³) 

Firing order 

1 - 4 -2 - 5 - 3 - 6 

Compression ratio 

9.75:1 

Direction of rotation 

Anti-clockwise viewed from rear of engine 

Maximum power 

156 Kw (209 bhp) @ 4750 rev/min 

Maximum torque 

346 Nm (255 lb-ft) @ 3500 rev/min 

Dimensions: 

  

Length 

669 mm (26.3 in) 

303-01A Engine- 4.0L|Specifications|Page 749 > < Valve Stem Diameter