Freelander Service Procedures
EXTERIOR FITTINGS
REPAIRS
76-2-9
Refit
1. Fit bonnet release cable through bulkhead.
2. Position bonnet release lever and connect
bonnet release cable to lever.
3. Fit release lever to 'A' post and tighten bolt to 9
Nm (7 lbf.ft).
4. Fit bonnet release cable grommet to bulkhead.
5. Position bonnet release cable to main harness
and secure with cable ties.
6. Fit sound insulation to bulkhead.
7. Tie draw string to end of bonnet release cable.
8. Pull draw string to fit bonnet release cable
through bonnet locking platform.
9. Untie draw string from bonnet release cable.
10. Fit bonnet lock.
11. Close bonnet and check for correct locking
operation.