LR3/Disco 3
Front Seat Recliner Motor (78.70.34)
Removal
Installation
Published : Aug 3, 2004
1 .
Remove the front seat backrest cover. For additional information, refer to
Front Seat Backrest Cover
(78.90.08)
(Section 501-10)
2 .
Remove the front seat backrest pad.
3 .
Remove the front seat recliner motor.
Disconnect the electrical connector.
Remove the Torx bolt.
Remove the front seat backrest shaft clip.
Remove the front seat backrest shaft.
1 .
Install the front seat recliner motor.
Install the front seat backrest shaft.
Install the front seat backrest shaft clip.
Tighten the Torx bolt to 10 Nm (7 lb.ft).
Connect the electrical connector.
2 .
Install the front seat backrest pad.