Camshaft timing belt (page 4 of 6)
- Make
- Rover
- Model
- 200 Workshop Manual
- Year
- 1995–1999
- Section
- Repairs
Engine - L SeriesCamshaft timing belt · page 4 of 6
- Loosen tensioner pulley Allen bolt until tensioner moves easily without tipping.
- Release timing belt tensioner plunger using tool 18G 1719.
- Remove tool 18G 1719 from camshaft timing belt tensioner and tighten Allen bolt to 55 Nm.
CAUTION: Do not exceed the specified torque figure.
- Fit timing belt tensioner access plug to back cover.
- Remove Allen bolt access plug from lower cover.
- Fit camshaft timing belt lower cover. See this section.
- Remove timing pin 18G 1523 and using a socket and extension bar on crankshaft pulley bolt, rotate crankshaft two revolutions clockwise until timing pin 18G 1523 can be inserted in hole in flywheel.
- Check camshaft gear timing mark is aligned with mark on back cover.
Parts & tools for this job For 1995 Rover 200
- PARTTiming belt kitSearch: Rover 200 1995 timing belt kit
- TOOLEngine timing tool setSearch: Rover engine timing tool set
- TOOLTorque wrenchSearch: 3/8 inch torque wrench
Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.