Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K1606 Engine - K16 with VVC07 Emission control08 Engine management system - MEMS09 Fuel delivery system10 Cooling system11 Manifold & exhaust systems12 Clutch13 Manual gearbox - R6514 Manual gearbox - PG115 Automatic gearbox - CVT16 Steering17 Front suspension18 Brakes19 Restraint systems20 Body21 Heating & ventilation22 Air conditioning23 Wipers & washers24 Electrical25 Instruments
Rover 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement24 · Electrical
24 · Electrical

Battery

Make
Rover
Model
Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
Section
Repairs › Battery
ElectricalBattery

BATTERY

Service repair no - 86.15.01

Remove

  1. Disconnect both battery leads, earth lead first.
Battery – Disconnect both battery leads, earth lead first.
  1. Remove bolt securing battery clamp to battery tray.
  2. Remove battery clamp.
  3. Release and remove battery from vehicle.

Refit

  1. Clean battery terminals and coat with petroleum jelly.
  2. Position battery to battery tray.
  3. Fit battery clamp and secure with bolt.
  4. Position and connect battery leads, earth lead last

CENTRAL DOOR LOCKING (CDL) ECU

Service repair no - 86.26.01

The central door locking system and the Anti-theft alarm are controlled by a common ECU. Refer to Anti-theft alarm ECU for further details. See this section.

Parts & tools for this job For Rover Coupé, Cabriolet & Tourer

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.