Workshop Manuals Factory service & repair Rover
01 Introduction02 General information03 Information04 Maintenance05 Engine - K1606 Engine - K16 with VVC07 Emission control08 Engine management system - MEMS09 Fuel delivery system10 Cooling system11 Manifold & exhaust systems12 Clutch13 Manual gearbox - R6514 Manual gearbox - PG115 Automatic gearbox - CVT16 Steering17 Front suspension18 Brakes19 Restraint systems20 Body21 Heating & ventilation22 Air conditioning23 Wipers & washers24 Electrical25 Instruments
Rover 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement24 · Electrical
24 · Electrical

Anti-theft alarm led

Make
Rover
Model
Coupé, Cabriolet & Tourer 200/400 Coupé, Cabriolet & Tourer Workshop Manual Supplement
Section
Repairs › Anti-theft alarm led
ElectricalAnti-theft alarm led

ANTI-THEFT ALARM LED

Service repair no - 86.55.97

Remove

  1. Remove instrument pack. See INSTRUMENTS, Repairs.
Anti-theft alarm led – Remove instrument pack. See INSTRUMENTS, Repairs.
  1. Remove anti-theft alarm LED from rear of instrument pack.

Refit

  1. Fit LED to rear of instrument pack.
  2. Fit instrument pack. See INSTRUMENTS, Repairs.

STARTER MOTOR - ’K16’

Service repair no - 86.60.01

Remove

  1. Remove air cleaner. See ENGINE MANAGEMENT SYSTEM - MEMS, Repairs.
  2. Raise front of vehicle.

WARNING: Support on safety stands.

Starter motor - ’k16’ – Raise front of vehicle.
  1. Remove nut securing battery lead to starter solenoid.
  2. Disconnect battery lead from starter solenoid.
  3. Disconnect Lucar from starter solenoid.
  4. Remove upper bolt securing starter motor to engine.
  5. Disconnect battery earth lead from bolt.

Parts & tools for this job For Rover Coupé, Cabriolet & Tourer

Links open Amazon search results in a new tab. As an Amazon Associate I earn from qualifying purchases.