landrover Workshop Repair Guides

Land Rover Workshop Service and Repair Manuals

Column assembly - inner & outer > < Column lock & ignition/starter switch assembly
Page 511
background image

STEERING

57-18

REPAIRS

Cable - key interlock

$% 57.40.51

Remove

1. Disconnect battery earth lead.
2. Remove front console.

 

 + 

 INTERIOR TRIM COMPONENTS, 

REPAIRS, Console - front - up to 04MY.

3. Loosen bolt securing cable clamp.
4. Disconnect cable from interlock mechanism.
5. Remove key from starter switch.
6. Remove steering column nacelle.

 

 + 

 STEERING, REPAIRS, Nacelle - 

column.

7. Remove bolt securing  steering column height 

adjuster lever and remove lever.

NOTE: Thread is left handed.

8. Remove nut securing height adjuster clamp 

bolt  and remove bolt.

9. Collect plastic stop.

10. Loosen union and disconnect cable from 

column lock.

11. Release cable from 2 retaining clips.
12. Note the cable routing, manoeuvre cable from 

under heater and steering column bracket.

13. Remove cable.

Column assembly - inner & outer > < Column lock & ignition/starter switch assembly