Range Rover P38
CHASSIS AND BODY
11
REPAIR
5. Remove 2 bumper bolt access plugs from
bumper valance. Remove bolts.
6. With assistance remove bumper assembly.
Do not carry out further dismantling if
component is removed for access only.
7. Remove 8 studs and 6 clips securing extensions
spoiler. Remove extension.
8. Remove 8 screws securing fog lamps. Remove
lamps.
9. Remove 8 bolts securing bumper end brackets
to bumper. Remove brackets.
WARNING: If front bumper is damaged due
to impact, the impact cans must be
inspected. There must be no visible
deformation. The overall length must be 188.25
mm æ 0.5 mm. Replace the impact cans if
necessary.
Refit
10. Fit end brackets and secure with bolts. Fit fog
lamps and secure with screws.
11. Fit extension and secure with clips and studs.
12. With assistance fit bumper assembly, tighten
bolts to
70Nm. (52 lbf.ft)
13. Fit bolt access plugs.
14. Align end brackets, tighten bolts and secure
bumper end clips.
15. Connect fog lamp multiplugs and breather
hoses, fit battery cover.
16. Remove safety stands. Lower vehicle.