Freelander Service Procedures
RESTRAINT SYSTEMS
75-20
REPAIRS
Airbag module - steering wheel -
deployment - off vehicle
$% 76.74.16
These guidelines are written to aid authorised
personnel to carry out the safe disposal of airbag
modules when removed from the vehicle.
Deploy
WARNING: It is imperative that before any
work is undertaken on the SRS system, the
appropriate information is read thoroughly.
1. Make the SRS system safe.
2. Remove airbag module from steering wheel.
3. Check condition of deployment tool LRT-86-
003 and associated flyleads.
4. Position toolLRT-86–007–02 in vice, ensuring
that vice jaws grip tool above bottom flange to
prevent possibility of tool being forced upwards
from vice. Tighten vice.
5. Secure airbag module to tool LRT-86–007–02
using both fixings LRT-86–007–05.
6. Ensure airbag module mounting brackets are
secure.
WARNING: Ensure the deployment tool is
not connected to the battery.
7. Connect deployment tool flylead LRT-86–003–
08 to driver airbag module.
8. Connect deployment tool flylead LRT-86–003–
08 to deployment tool LRT-86–003.
9. Connect tool LRT-86–003 to battery.
WARNING: Ensure all personnel are at least
15 metres (50 ft) away from the airbag
module.