Freelander Service Procedures
RESTRAINT SYSTEMS
REPAIRS
75-11
Stalk - rear seat belt - centre
$% 76.73.98
Remove
WARNING: It is imperative that before any
work is undertaken on the SRS system the
appropriate information is read thoroughly.
WARNING: When removing, testing or
installing a seatbelt pre-tensioner, do not
lean directly over it or block the end of the
piston tube.
WARNING: Always remove the key from the
starter switch, disconnect the vehicle
battery and wait 10 minutes before
commencing work on the SRS system.
1. Remove RH rear seat.
SEATS, REPAIRS, Rear seat - RH.
2. Remove 2 screws and remove seat belt reel
cover.
3. Remove nut and release seat belt reel.
4. Remove 5 screws and remove both end
covers.
5. Remove 3 Torx bolts and remove squab from
cushion.