Freelander Service Procedures
RESTRAINT SYSTEMS
REPAIRS
75-23
Pre-tensioner - front seatbelt -
deployment - in-vehicle
$% 76.73.77
These guidelines are written to aid authorised
personnel to carry out the safe deployment and
disposal of seatbelt pre-tensioners when they are still
fitted in the vehicle.
Deploy
WARNING: It is imperative that before any
work is undertaken on the SRS system, the
appropriate information is read thoroughly.
1. Make the SRS system safe.
2. Check condition of deployment toolLRT-86–
003 and associated flyleads.
3. Slide seat fully rearwards to access pre-
tensioner harness connector.
4. Disconnect pre-tensioner harness connector.
WARNING: Ensure the deployment tool is
not connected to the battery.
5. Connect deployment tool flylead LRT-86–003–
04 to pre-tensioner connector.
6. Connect deployment tool flylead LRT-86–003–
04 to deployment tool LRT-86–003.
WARNING: Ensure the SRS component to
be deployed is securely fastened to its
mounting.
WARNING: Ensure all personnel are at least
15 metres (50 ft) away from the vehicle.
7. Connect deployment tool LRT-86–003 to
battery.