Range Rover P38
76
CHASSIS AND BODY
NEW RANGE ROVER
82
REPAIR
6. If fitted, disconnect heating element multiplugs.
Disconnect heating element earth wire. Tape
heater connections onto windscreen to prevent
fouling during removal procedure.
7. Mask around windscreen aperture to protect
paintwork.
8. Fit protective cover over fascia and bonnet.
Removal Using Reciprocating Blade Tool
9. Cut through P.U. adhesive along sides of screen
using flat blade.
10. Using a ’U’ shaped blade, cut through adhesive
bead along upper and lower edges of screen.
CAUTION: Access to adhesive around
lower screen supports is restricted.
Manoeuvre blade to cut as much sealant
from around screen supports as possible.
11. Attach suction lifters to glass. With assistance,
cut through remaining sealant around screen
supports using a sharp knife.
12. With assistance, remove windscreen glass.