Adjustment (Cont'd) - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › Adjustment (Cont'd) - Nissan 180SX S13 Workshop Manual
Adjustment (Cont'd)
ASSEMBLY
Adjustment (Cont'd)
Install needle bearing on oil pump assembly.
f.
_.
Measure distance “D” between needle bearing and ma-
g.
chined surface of oil pump cover assembly.
Oil pump assernbly
SAT2118 Oil pump Olt pump
h. Determine total end play “T.”’ by using the following equa- tion. assembly gasket T=A-D-O1 Total end play “T,”:
0.25 - 0.55 mm (0.0098 - 0.0217 in) @ If end play is out of specification, decrease or increase thickness of oil pump cover bearing race as necessary. Available oil pump cover bearing race: ae Refer to §.D.S. Needle Bearing Clutch pack race bearing SAT9TEA Adjust reverse clutch drum end play.
3. Clutch pack Oil pump thrust washer
a. Install oil pump thrust washer on clutch pack.
SAT2128
b. Measure distance ‘‘F’ between front end of transmission case and oil pump thrust washer.
c. Measure distance ‘““G” between front end of transmission case and gasket.
Oil pump thrust washer SAT213B
Parts & tools for this job For Nissan 180SX
- PARTTransmission filter kitSearch: Nissan 180SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.