REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
- Make
- Nissan and Datsun
- Model
- 180SX Nissan 180SX S13 1989 Workshop Manual
- Section
- General › REPAIR FOR COMPONENT PARTS - Nissan 180SX S13 Workshop Manual
REPAIR FOR COMPONENT PARTS
REPAIR FOR COMPONENT PARTS
Forward and Overrun Clutches (Cont’d)
@ Removal and installation of return springs
KV31102400
SAT8644 @ inspection of forward clutch and overrun clutch return springs diameter Inspection standard: Unit: mm (in) \\ Outer Part No. g D : D 31505-41X01
35.77 (14083)
9.7 (0.382) | sié‘“k : Free length
SATB29A @ inspection of forward clutch drive plates Thickness Thickness of drive plate: Standard Facing
2.0 mm (0.079 in) Wear limit
1.8 mm (0.071 in)
Core plate
SATB45A @ Inspection of overrun clutch drive plates Thickness Thickness of drive plate: Standard
2.0 mm (0.079 in) Facing = Wear limit
1.8 mm (0.071 in)
Core plate
SATB45A @ installation of forward clutch piston and overrun clutch piston
1. Install forward clutch piston by turning it slowly and evenly. @ Apply A.T.F. to inner surface of clutch drum.
u ‘list
lY sateeea
i
AT-118
Parts & tools for this job For Nissan 180SX
- PARTTransmission filter kitSearch: Nissan 180SX transmission filter kit
- FLUIDAutomatic transmission fluidSearch: Nissan automatic transmission fluid
- TOOLFluid transfer pumpSearch: fluid transfer pump
As an Amazon Associate we earn from qualifying purchases.